Xerox Nuvera 200/288 MXXerox печатная техникаP/N: | |
 B and W Transaction Digital Printing Presses
| Performance |
| Rated speed |
Xerox Nuvera 288MX:
- 288 ipm (duplex 8.5" x 11"/A4)
- 144 ipm (duplex 11" x 17"/A3)
Xerox Nuvera 200MX:
- 200 ipm (duplex 8.5" x 11"/A4)
- 120 ipm (duplex 11" x 17"/A3)
|
| Resolution |
Print: 4800 x 600 dpi
RIP: 1200 x 1200 dpi |
| Recommended average monthly volume |
- Xerox Nuvera 288MX: 3,000,000 images per month
- Xerox Nuvera 200MX: 2,400,000 images per month
|
| Duty cycle |
- Xerox Nuvera 288MX: up to 7,800,000 images per month
- Xerox Nuvera 200MX: up to 6,000,000 images per month
|
| Line Screens |
85, 106, 125, 134, or 156 lpi |
| Capabilities |
| Standard Capabilities |
Production MICR printing |
| Printed Sides |
Duplex |
| MICR |
Yes |
| Technology |
| PDLs |
TIFF/PCL 5e & PCL6/ASCII-standard Adobe PDF; Adobe PostScript Level 3; Multi-page TIFF; PPML; LCDS/Metacode; IPDS |
| Network Interfaces |
- Ethernet interface (10/100BaseT; 1 GB)
- S/370 or S/380 Bus and Tag (optional)
|
| User Interface |
19" color flat panel monitor (attached), USB keyboard, USB mouse |
| CPU |
3.0 GHz Dual Core Processor (optional second dual core processor with additional 4 GB memory) |
| Memory |
4 GB (optional second dual core processor with additional 4 GB memory) |
| Hard Disk |
160 GB SATA
Second Hard Drive: 1 TB SATA (optional) |
| Paper Handling |
| Paper sources |
up to 3 feed modules (2 or 4 paper trays per module), plus an optional post-print insertion module |
| Standard paper capacity |
3,200 or 5,800 sheets per module
- Standard sheet feed module (4-tray): 5,800 sheets
- Oversized high capacity sheet feed module (2-tray): 3,200 sheets
|
| Media Dimensions - Minimum |
5.5 x 8 inches |
| Media Dimensions - Maximum |
12.6 x 19.33 inches |
| Media Weight - Minimum |
Coated: 90 gsm
Uncoated: 56 gsm |
| Media Weight - Maximum |
Coated: 140 gsm
Uncoated: 250 gsm |
| Media Types |
Coated: gloss, silk, matte
Uncoated: book, text, bond, cover, bristol, index offset
Specialty: tabs, envelopes, carbonless, preprinted offset forms |
| Input |
| High Capacity Feeder |
Standard Four-tray Sheet-feed Module: 5,800 sheets
Oversized High-Capacity Sheet Feed Module: 3,200 sheets, up to 12.5" x 19.3" |
| Other Input Devices |
Post-print Four-tray Paper Insertion Module: 5,800 sheets
Post-print Oversized Two-tray Paper Insertion Module: 3,200 sheets |
| Finishing |
| Finisher |
- Basic Finisher Module: 3,000 sheet stacker, offset between sets or jobs. 1 or 2 staples, up to 70 sheets.
- Basic Finisher Module Plus: Used in addition to Basic Finisher Module, stacks up to 3,000 additional sheets, 1 or 2 staples, up to 100 sheets
- Basic Finisher Module-DC (Direct Connect): Provides DFA (Document Finishing Architecture) to enable direct connection to several center-registered in-line finishing devices such as the Xerox Tape Binder, C.P. Bourg (Watkiss) PowerSquare™ 200, and CEM DocuConverter™
|
| Tape Bound |
Xerox Nuvera Tape Binder |
| Slitter/Merger |
CEM DocuConverter™ |
| Stacker |
Xerox DS3500 Stacker |
| Print Controllers |
| Digital Front Ends |
Xerox FreeFlow™ Print Server |
| Environmental |
| Electrical Requirements |
Dual 187-240 VAC (nominal), 50 Amp, 50/60 Hz
DS3500 and DFA Finishers require additional line service and power
Optional modules require standard 100-240 VAC, 50/60 Hz line service |
| Dimensions |
Print Engine: W: 88"; D: 29"; H: 61.6"
Sheet Feed & Insertion Module: W: 31.7"; D: 28"; H: 44.6"
Sheet Enhancement Module: W: 15"; D: 28"; H: 41.5"
Basic Finisher Module: W: 33"; D: 28"; H: 44.6"
Basic Finisher Module Plus and Basic Finisher Module-DC: W: 49"; D: 28"; H: 44.6"
Xerox DS3500 Stacker: W: 35"; D: 28"; H: 44.75"
Xerox Tape Binder: W: 34.1"; D: 28"; H: 42.4" |
|
|  | Корзина | В корзине нет товаров Уважаемый(-ая), Гость! Вы не зарегистрированы. Ваша скидка: 0% |
ОБОРУДОВАНИЕ, БЫВШЕЕ В УПОТРЕБЛЕНИИУЦЕНЕННЫЕ ТОВАРЫ
|
STOCK LIST
